Skip to main content

Getting WINS-like computer name resolution over VPN in SBS 2008



One of these was something that I used for my convenience over a VPN connection from home. You see, the internal order processing application that I wrote uses some shared folders to store some temporary data, such as e-mails that are generated but not yet released to Exchange, or a local copy of images that are available on the Web site. This software–and our users–are used to referring to Windows file shares as \\COMPUTER-NAME\SHARE-NAME; for example, \\CYRUS\Pickup Holding, because for some reason some of the older servers are named after my boss’s dead cats.
When connecting through VPN to SBS 2008, however, that “suffix-less” name resolution was not working. So when \\CYRUS\Pickup Holding failed to resolve to anything,\\cyrus.skiviez.com\Pickup Holding would work fine. This was super annoying.
The reason this worked previously with our SBS 2003 installation is that it was acting as a WINS server, which provided this type of computer name resolution for us. SBS 2008 finally retires this ancient technology by default, however, so I had two choices: I could either install the WINS server role on SBS 2008, or I could just figure out how to get the 015 DNS Domain Name option from DHCP to relay through the VPN connection.
I chose the latter option, since it’s certainly less confusing to be able to say to someone in the future “we don’t use WINS, DNS does everything.” So here’s how to do it:
  1. On the SBS 2008 server, click Start > Administrative Tools > Routing and Remote Access.
  2. In the tree view, drill down past the server name to IPV4 > General. Right-click the General option and choose “New Routing Protocol” and choose DHCP Relay Agent.
  3. Now right-click the newly appended “DHCP Relay Agent” node and choose Properties. Add the IP address of your DHCP server (which is probably your SBS server itself), and click OK. Then click it again and choose “New Interface” and add the “Internal” interface.
  4. Now if you connect through VPN, an ipconfig /all should show your domain name as a “Connection-specific DNS suffix” and pinging machines by their suffix-less computer names should work. (If it doesn’t, make sure your DHCP server is using that 015 DNS Domain Name option, which the SBS 2008 wizards set up by default.)

Popular posts from this blog

HOW TO EDIT THE BCD REGISTRY FILE

The BCD registry file controls which operating system installation starts and how long the boot manager waits before starting Windows. Basically, it’s like the Boot.ini file in earlier versions of Windows. If you need to edit it, the easiest way is to use the Startup And Recovery tool from within Vista. Just follow these steps: 1. Click Start. Right-click Computer, and then click Properties. 2. Click Advanced System Settings. 3. On the Advanced tab, under Startup and Recovery, click Settings. 4. Click the Default Operating System list, and edit other startup settings. Then, click OK. Same as Windows XP, right? But you’re probably not here because you couldn’t find that dialog box. You’re probably here because Windows Vista won’t start. In that case, you shouldn’t even worry about editing the BCD. Just run Startup Repair, and let the tool do what it’s supposed to. If you’re an advanced user, like an IT guy, you might want to edit the BCD file yourself. You can do this

DNS Scavenging.

                        DNS Scavenging is a great answer to a problem that has been nagging everyone since RFC 2136 came out way back in 1997.  Despite many clever methods of ensuring that clients and DHCP servers that perform dynamic updates clean up after themselves sometimes DNS can get messy.  Remember that old test server that you built two years ago that caught fire before it could be used?  Probably not.  DNS still remembers it though.  There are two big issues with DNS scavenging that seem to come up a lot: "I'm hitting this 'scavenge now' button like a snare drum and nothing is happening.  Why?" or "I woke up this morning, my DNS zones are nearly empty and Active Directory is sitting in a corner rocking back and forth crying.  What happened?" This post should help us figure out when the first issue will happen and completely avoid the second.  We'll go through how scavenging is setup then I'll give you my best practices.  Scavenging s

AD LDS – Syncronizing AD LDS with Active Directory

First, we will install the AD LDS Instance: 1. Create and AD LDS instance by clicking Start -> Administrative Tools -> Active Directory Lightweight Directory Services Setup Wizard. The Setup Wizard appears. 2. Click Next . The Setup Options dialog box appears. For the sake of this guide, a unique instance will be the primary focus. I will have a separate post regarding AD LDS replication at some point in the near future. 3. Select A unique instance . 4. Click Next and the Instance Name dialog box appears. The instance name will help you identify and differentiate it from other instances that you may have installed on the same end point. The instance name will be listed in the data directory for the instance as well as in the Add or Remove Programs snap-in. 5. Enter a unique instance name, for example IDG. 6. Click Next to display the Ports configuration dialog box. 7. Leave ports at their default values unless you have conflicts with the default values. 8. Click N